802.11b/g/n, Bluetooth v4.2 + EDR, Class 1, 2 and 3
448kB ROM, 536kB SRAM
CCK, DSSS, OFDM
GPIO, I2C, I2S, PWM, SDIO, SPI, UART
Package / Case:
10000 Piece/Pieces per Week
Packaging & Delivery
Original Factory Sealed Packing.
1 - 1000
To be negotiated
Welcome To ACT
ACT International Trading Limited leading independent distributor of military, industrial and commercial electronic components(i.e. CPUs, memory, semiconductors,connectors,actives, passives, storage devices, etc.) for 10 years in domestic market with big stock and many competitive reliable branchising suppliers.
We are willing take the best quality, service and reputation to prove the most reliable supplier to worldwide customers.
Any inquiry need to check at anytime,no hesitate to call us or send us email,we will check the stock for you soon.
ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
ESP32-WROOM-32U is different from ESP32-WROOM-32D in that ESP32-WROOM-32U integrates a U.FL connector. For detailed information of the U.FL connector please see Chapter 10. Note that the information in this data sheet is applicable to both modules. Any differences between them will be clearly specified in the course of this document. Table 1 lists the difference between ESP32-WROOM-32D and ESP32-WROOM-32U.
At the core of the two modules is the ESP32-D0WD chip that belongs to the ESP32 series* of chips. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power co-processor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I²S and I²C.
The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is all-around: using Wi-Fi allows a large physical range and direct connection to the Internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. The module supports a data rate of up to 150 Mbps, and 20 dBm output power at the antenna to ensure the widest physical range. As such the module does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity.
The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that users can upgrade their products even after their release, at minimum cost and effort.
Table 2 provides the specifications of ESP32-WROOM-32D and ESP32-WROOM-32U.